KHIKA App for Seqrite Utm Firewall

Introduction

Firewall form an important part of organisations’ networks and hence by monitoring your firewall is imperative. Seqrite UTM Firewall send the traffic and user activity related information in the form of logs over syslog protocol. KHIKA Data Aggregator is pre-configured with syslog services on port 514. The key parts to get here are :

1. Enabling Syslog forwarding on the device
2. Install the KHIKA App for Checkpoint Firewall
3. Get data from your Checkpoint Firewall into KHIKA Aggregator

Verifying SYSLOG data collection

After you enable the syslog forwarding on the end device, you must verify if the logs are being really received by KHIKA Data Aggregator. Please refer here to understand how to verify syslogs on KHIKA Data Aggregator.

How to Install the KHIKA App for Seqrite UTM Firewall ?

It is assumed, that you have already configured KHIKA Data Aggregator in your environment. If not, please read how to configure KHIKA Data Aggregator and perform the pre-requisite steps.

This section explains how to pick and install the KHIKA application for Seqrite UTM Firewall - Seqrite UTM Firewall. Installing the application shall put together and activate the adapter (parser) that can handle Checkpoint Firewall data format, the dashboards and the alert rules preconfigured.

Go to “Applications” tab in the “Configure” menu.

Check whether the appropriate Workspace is selected. Note: Application is always loaded in a Workspace. Read the section on Workspaces to know more about KHIKA Workspaces. Also select your KHIKA aggregator name in the Node dropdown. This is to ensure that we are collecting data from the desired source and into the correct workspace which is ready with the configured application and components.

Click on the “+” button. A pop up appears.

User can now select the contents of the application required. For example, on the dropdown for “Reports”, click to expand it. List of all reports can be seen. User can individually select the reports required by checking on the checkbox next to each. Alternatively, check on “Select All” option to get all of them. Similarly you can select contents from Alerts and Dashboards.

Visit the sections on KHIKA Reports, KHIKA Dashboards, KHIKA Alerts & Correlations to know more about these topics.

Click “OK” to proceed with the installation of the selected Application. After successful installation, following status should be displayed :

This simple procedure to install a KHIKA App, automatically configures the Adapter (required for parsing the data from raw syslogs), calculated KHIKA reports on raw data, Visualizations, Dashboards and Alerts – all in one click.

Adding the device in the Adaptor

After syslogs are enabled on the device and the App is installed into KHIKA, it is the time to add the device to the this App (in Adapter section of KHIKA Web GUI). Please refer here to know how to add the device to an App.

After making these configuration in KHIKA, you must apply these changes to the Workspace. Go to Configure, select the Workspace and in Workspace tab of configure menu press the Apply button as shown in the screenshot below.

Wait for a few minutes for changes to apply and data to arrive in kHIKA. With all these steps, we should now expect the data to arrive in KHIKA. Lets discover some live data in KHIKA.

How to check the output of KHIKA Seqrite UTM Firewall App ?

Discovering the logs of Seqrite UTM Firewall

After doing all the steps given above, we should start receiving live data into KHIKA. Go to "Discover" section in KHIKA GUI and select the index with name "*raw-seqrite_utm_firewall*". Note that the index has a prefix of the customer name and workspace name. After selecting this index, you should see the live data coming in. Spend some time understanding this data and the fields of the data.

SEQRITE UTM Bandwidth Usage Dashboard

This Dashboard briefly explains the bandwidth consumption by user.

Elements in the Dashboard are explained below :

Elements in "Seqrite UTM Bandwidth Usage" Dashboard

Visualization	Description
Contribution of User	Contribution of top users present in the events.
User wise Max Total Usage	X axis : User(s) Y axis : Total usage by the user.
User IP Address wise Max Daily Download	X axis : User IP(s) Y axis : Max of Daily Download by the User IP.
User IP Address wise Max Daily Upload	X axis : User IP(s) Y axis : Max of Daily Upload by the user IP.
Daily trend	Trend of bandwidth events over time. Useful to identify unusual spikes at a glance. X axis : date & time Y axis : count of events
Summary Table	Detailed data with timestamp and count

A suggestion for useful interaction with this dashboard could be :

1. Click on "User" in Contribution of User donut chart.This selected change will be reflected in all the visualizations accordingly.In next "User wise Max Total Usage" visualization we can see the Max of Total Usage done by the user."User IP Address wise Max Daily Download" shall show user ip wise Max daily download which are related to the selected user.Detailed information can be seen in the detailed "Summary Table".

SEQRITE UTM Intrusion Prevention Dashboard

This dashboard shows summary of Intrusion Prevention.

Elements in the Dashboard are explained below :

Elements in "Seqrite UTM Bandwidth Usage" Dashboard

Visualization	Description
Contribution Of Intrusion Signature	Contribution of different Intrusion Signatures present in the events.
Contribution Of Destination IP	Contribution of different Destination IP(s)
Contribution Of Destination Port	Contribution of Destination Port(s) like on which port the communication took place.
Contribution Of Source IP	Contribution of Source IP(s) from where the communication initiated.
Daily trend	Trend of events related to Intrusion Prevention over time. Useful to identify unusual spikes at a glance. X axis : date & time Y axis : count of events
Summary Table	Detailed data with timestamp and count

A suggestion for useful interaction with this dashboard could be :

1. Click on Source IP from "Contribution Of Source IP".This selection will result into reflection of all the visualizations present in the dashboard accordingly.In "Contribution Of Destination IP" we can see the destination(s) in the communication with respect to the selected Source IP.Similarly, "Contribution Of Intrusion Signature" will display the Intrusion Signature for the selected fields captured in the events.Detailed information related to this dashboad can be seen in the Summary Table.

SEQRITE UTM Malicious Communication Dashboard

This dashboard shows brief summary of Malicious Communication happening in our network

Elements in the Dashboard are explained below :

Elements in "Seqrite UTM Bandwidth Usage" Dashboard

Visualization	Description
Contribution of Action	Contribution of Different Actions present in the Communication.
Contribution of Malicious IP	Contribution of Top Malicious IP(s) present in the communication.
Contribution of Source IP	Contribution of Top Source IP(s) present in the communication.
Contribution Of Destination IP	Contribution of Top Destination IP(s) present in the communications.
Daily trend	Trend of Malicious Communication related events over time. Useful to identify unusual spikes at a glance. X axis : date & time Y axis : count of events
Summary Table	Detailed data with timestamp and count

SEQRITE UTM Policy Breach Attempts Dashboard

This dashboard shows summary of policy breach attempts

Elements in the Dashboard are explained below :

Elements in "Seqrite UTM Bandwidth Usage" Dashboard

Visualization	Description
Contribution of User
User wise Max Total Usage
User IP Address wise Max Daily Download
User IP Address wise Max Daily Upload
Daily trend	Trend of bandwidth events over time. Useful to identify unusual spikes at a glance. X axis : date & time Y axis : count of events
Summary Table	Detailed data with timestamp and count

SEQRITE_UTM-Website Category Wise URL Access Dashboard

This dashboard shows distribution of websites accessed as per category

Elements in the Dashboard are explained below :

Elements in "Seqrite UTM Bandwidth Usage" Dashboard

Visualization	Description
Contribution of User
User wise Max Total Usage
User IP Address wise Max Daily Download
User IP Address wise Max Daily Upload
Daily trend	Trend of bandwidth events over time. Useful to identify unusual spikes at a glance. X axis : date & time Y axis : count of events
Summary Table	Detailed data with timestamp and count

Seqrite UTM Firewall Alerts

Alerts are generated when certain critical behavior is observed in the system. Alerts can be monitored in real-time on Alerts Dashboard in KHIKA. Relevant stakeholders can also receive the alerts via emails. The table below explains all the pre-canned alerts shipped with KHIKA App for Seqrite UTM Firewall.

Alerts Description

Alert Details Table

Alert Name	Description	Suggested Resolution
Seqrite utm firewall sweep scan attack	This alert is triggered when same source ip is trying to generate traffic on more than 10 destination ip but all the time request is denied .All this happen within 1 minute.	An attacker tries to spray connection requests on one of the popular ports (21,22,53,80,443 etc) on multiple IP addresses with an intention to find which ports are opened on what IP addresses. Typically, scan attempt is the first stage of reconnaissance in the attack life cycle. Unless it is a known and legitimate IP address performing scan, it is important to block this IP. You may white-list the known IP addresses (such as designated Vulnerability Scanner, Asset Discovery Tools etc), so as to suppress the false positives.
Seqrite utm firewall host scan activity	This alert is triggered when same source ip is trying to generate traffic on same destination ip on more than 10 destination port but all the time request is denied .All this happen within 1 minute.	An attacker tries to spray connection requests on multiple popular ports (21,22,53,80,443 etc) targeting one single IP addresses at a time with an intention to find the open ports on the target IP address. Typically, scan attempt is the first stage of reconnaissance in the attack life cycle. Unless it is a known and legitimate IP address performing the scan, it is important to block this IP. You may white-list the known IP addresses (such as designated Vulnerability Scanner, Asset Discovery Tools etc), so as to suppress the false positives.
Seqrite utm firewall communication with possible ioc or bad ip	This alert is triggered when any one of the Source or Destination IP is found malicious with accepted action	KHIKA shares community based threat intelligence (TI) every 24 hours. TI has list of IP addresses with bad reputation. Every bad IP is marked with number of communities reporting it, name of each community and confidence indicating how confident are we about the reputation. This alert is generated when communication with a bad IP is let through. If communication with a bad IP is happening, it must be blocked immediately as it could be a possible attack or data exfiltration. You can check how log this communication is happening by simply searching the malicious IP in the logs. You can also check what internal IP addresses are communicating with this IP addresses and track the real users behind those internal IP addresses. Cross-check the reputation of the IP with popular websites such as ipvoid.com, virustotal.com If you see an internal IP constantly getting involved in malicious communication (with same or multiple external IP addresses), you may install agents on the internal nodes involved and check the real user and process responsible for this communication. It is critical to block this rogue communication.
Seqrite utm firewall seqrite backdoor activity	This alert is triggered when traffic is generated from internal machine on vulnerable ports(3127,3198,6129,7080).	This event indicates that a traffic is generated from internal machine on vulnerable ports(3127,3198,6129,7080). Typically, these ports are used by attacker to exploit vulnerable programs listening on these ports. Check is these ports are open and on what servers. Do you really need these ports opened? Check what programs are running on these ports. Check vulnerability reports of the applications Block these ports for external traffic, unless mandatory to keep them opened. If you have to keep any of these ports opened, try to restrict the access to legitimte IPs. If you get a suspicious IP repetitively trying to access these port, block the IP. Check the reputation of the IP on popular website such as ipvoid.com, virustotal.com etc.
Seqrite utm firewall host communicating with multiple malicious hosts within 1 hour		KHIKA shares community based threat intelligence (TI) every 24 hours. TI has list of IP addresses with bad reputation. Every bad IP is marked with number of communities reporting it, name of each community and confidence indicating how confident are we about the reputation. This alert is generated when same internal ip communicates with multiple malicious IPs. If communication with a bad IP is happening, it must be blocked immediately as it could be a possible attack or data exfiltration. You can check how log this communication is happening by simply searching the malicious IP in the logs. You can also check what internal IP addresses are communicating with this IP addresses and track the real users behind those internal IP addresses. Cross-check the reputation of the IP with popular websites such as ipvoid.com, virustotal.com If you see an internal IP constantly getting involved in malicious communication (multiple external IP addresses), you may install agents on the internal nodes involved and check the real user and process responsible for this communication. It is critical to block this rogue communication.
Seqrite utm firewall policy breach attempts
Seqrite utm firewall communication between multiple Internal hosts and single malicious ip		KHIKA shares community based threat intelligence (TI) every 24 hours. TI has list of IP addresses with bad reputation. Every bad IP is marked with number of communities reporting it, name of each community and confidence indicating how confident are we about the reputation. This alert is generated communication happens between multiple internal hosts and same external malicious ip. If communication with a bad IP is happening, it must be blocked immediately as it could be a possible attack or data exfiltration. You can check how log this communication is happening by simply searching the malicious IP in the logs. You can also check what internal IP addresses are communicating with this IP addresses and track the real users behind those internal IP addresses. Cross-check the reputation of the IP with popular websites such as ipvoid.com, virustotal.com If you see an internal IP constantly getting involved in malicious communication (with same external IP addresse), you may install agents on the internal nodes involved and check the real user and process responsible for this communication. It is critical to block this rogue communication.
Seqrite utm firewall communication with suspicious ip	This alert is triggered when bytes are sent and received during communication with malicious ip within 1 minute.	Communication with a bad IP is happening, it must be blocked immediately as it could be a possible attack or data exfiltration. You can check the log for this communication by simply searching the malicious IP in the logs. You can also check which internal IP addresses are communicating with this IP address and track the real users behind those internal IP addresses. If you see an internal IP constantly getting involved in malicious communication (with same or multiple external IP addresses), you may install agents on the internal nodes involved and check the real user and process responsible for this communication. If required, quarantine the affected internal servers till the time the issues are resolved.
Seqrite utm firewall host scan activity by malicious ip	This alert is triggered when same malicious ip is trying to generate traffic for one destination ip on more than 10 different ports within 1 minute and the request is denied.	Bad ip address tries to spray connection requests on multiple popular ports (21,22,53,80,443 etc) targetting one single IP address at a time with an intention to find the open ports on the target IP address. Typically, scan attempt is the first stage of reconnaissance in the attack life cycle. It is important to check the reputation of the external ip address and block the same if necessary.
Seqrite utm firewall successful host scan activity by malicious ip	This alert is triggered when same malicious ip is trying to generate traffic for one destination ip on more than 10 different ports, but all the time request is denied .After that same malicious ip attempt to connect to same destination ip on one more port and this time it successfully connected on that port. All this happen within 1 minute.	Bad ip address tries to spray connection requests on multiple popular ports (21,22,53,80,443 etc) targeting one single IP addresses at a time with an intention to find the open ports on the target IP address. Typically, scan attempt is the first stage of reconnaissance in the attack life cycle and attacker done successful connection on open ports. It is important to check the reputation of the external ip address and block the same if necessary. It is also important to verify the sanity of affected internal nodes by checking if any unwarranted system policy change or software configuration/updates have occurred during the affected time period. If required, quarantine the affected servers till the time the issues are resolved.
Seqrite utm firewall sweep scan attack by malicious ip	This alert is triggered when same malicious ip is trying to generate traffic on more than 10 destination ip but all the time request is denied . All this happens within 1 minute.	Bad ip addresses tries to spray connection requests on one of the popular ports (21,22,53,80,443 etc) on multiple IP addresses with an intention to find which ports are opened on what IP addresses. Typically, scan attempt is the first stage of reconnaissance in the attack life cycle. It is important to check the reputation of the external ip address and block the same if necessary.
Seqrite utm firewall successful sweep scan activity by malicious ip	This alert is triggered when same malicious ip is trying to generate traffic on more than 10 destination ip but all the time request is denied .After that same source ip attempts to connect to one more destination ip and this time it successfully connects. All this happen within 1 minute.	Bad ip address tries to spray connection requests on one of the popular ports (21,22,53,80,443 etc) on multiple IP addresses with an intention to find which ports are opened on what IP addresses. Typically, scan attempt is the first stage of reconnaissance in the attack life cycle and attacker finds open port on one of ip addresses and is able to establish a connection. It is important to check the reputation of the external ip address and block the same if necessary. It is also important to verify the sanity of affected internal nodes by checking if any unwarranted system policy change or software configuration/updates have occured during the affected time period. If required, quarantine the affected servers till the time the issues are resolved.
Seqrite utm firewall successful sweep scan activity	This alert is triggered when same source ip is trying to generate traffic on more than 10 destination ip but all the time request is denied .After that same source ip attempts to connect one more destination ip and this time it successfully connects. All this happen within 1 minute.	Attacker tries to spray connection requests on one of the popular ports (21,22,53,80,443 etc) on multiple IP addresses with an intention to find which ports are opened on what IP addresses. Typically, scan attempt is the first stage of reconnaissance in the attack life cycle and attacker done successful connection on one of ip addresses It is important to check the reputation of the suspected ip address. If the suspected ip address is external, you may consider blocking it. If the suspected ip address is internal, you may need to verify the sanity of the corresponding device It is also important to verify the sanity of affected internal nodes by checking if any unwarranted system policy change or software configuration/updates have occured during the affected time period. If required, quarantine the affected servers till the time the issues are resolved. This may be a false positve.