Difference between revisions of "FAQs"

Revision as of 08:44, 14 August 2019

1 How to check if raw syslog data is received in the system? What if it is not received?
2 Why can’t I see any raw data on Discover Screen?
3 How to select data related to a particular device on your Dashboard?
- 3.1 Steps for Adding a Filter
- 3.2 Steps to Search and Save
4 How do I estimate my per day data?
5 SMTP settings in KHIKA
6 Dealing with Syslog Device in KHIKA
7 Dealing with Ossec Device in KHIKA
8 KHIKA Disk Management and Issues
9 Elasticsearch Snapshot functionality configuration
10 Check Status of Snapshot / Restore Functionality

How to check if raw syslog data is received in the system? What if it is not received?

In the section for adding data of syslog based devices we have explained how to enable syslog forwarding on the the data sources first and then add that device into KHIKA. When we add a device successfully, we can see the device entry in the “List of Devices” tab. (For this, go to Configure – Adapter – Manage Devices next to that Adapter.)

However if raw syslogs are not received from that device, we get an error while adding the device.

It is recommended to wait for upto 10 minutes before checking its data. To check whether we are receiving this device’s data in KHIKA, go to “Discover” screen from the left menu. Search for the IP address of the device in the search textbox on the top of the screen.

In our example from the image, IP address is “10.2.5.6”. In the search bar in the Discover screen, just enter “10.2.5.6”. This is for showing up any and all data relevant to the device with this IP.

If you can see data for this IP address, the logs are being received into KHIKA successfully.

If not, please check section for adding data of syslog based devices. Both the steps – adding a device in KHIKA as well as forwarding syslogs from that device to KHIKA should be verified again.

Why can’t I see any raw data on Discover Screen?

On the Discover screen, you have to choose 2 things to bring up your data :

Time duration
Index pattern

Select the required index pattern from the dropdown on the left of the Discover Screen. This selects your data type and whether it is “raw” or calculated “rpt” data. Refer section for help on changing index

Then select the time duration of data you want to see from the time picker functionality on top right. Selecting time window is explained here

If time duration is selected too large, it may severely affect the performance of MARS. We recommend not selecting the data beyond Last 24 hours. Your searches may time out if you select large Time Ranges.

Reduce your time window and try again. It is advised to keep a lesser time window. However on the contrary, if there is no / very less data in the picked time window, you might want to increase your time window from the time picker and load the screen again.

How to select data related to a particular device on your Dashboard?

Every dashboard in KHIKA will have multiple devices' data in it. For example, a linux logon dashboard has information about all the linux devices in the "LINUX" workspace say. the name of the relevant workspace is appears before the name of the dashboard.

To see data on the dashboard for only one linux device, you have to select the required device on your Dashboard. There are couple of ways to select an APV on your dashboard :

Add a filter
Enter Search query

The following procedure is applicable to all Dashboards.

Steps for Adding a Filter

On each dashboard, there is an option, “Add a filter”. Click on the “+” sign to add a new one. Use the simple drop downs in combination, to create your logical filter query.

faq3.1

faq3.2

The first dropdown is the list of fields from our data. We have selected “server_ip” here. The second dropdown is a logical connector. We have selected “is” in this dropdown. The third dropdown has the values of this field. We have selected one device say 10.13.1.3 here. So now, our filter query is : “server_ip is 10.13.1.3” Click on Save at the bottom of this filter pop up. Your Dashboard now shows data for only the selected device in all the pie charts, bar graphs and summary table – everywhere in the dashboard. The applied filter is seen on top.

faq3.3

To remove the filter, hover on the filter icon on top (selected in red in above figure). Icons appear. Click on the bin icon ifaq3.1 to remove the filter. The Dashboard returns to its previous state.

faq3.4

Please Note : If this is just a single search event, donot follow further steps. If you want to save this search for this particular device with the Dashboard, follow steps given further to save the search. Click on Edit link on the top right of the Dashboard – Save link appears. Click on Save to save this search query with the dashboard.

faq3.5

The filter currently applied shall continue to be seen on top of your Dashboard. You can remove this filter at any point of time in the future by clicking on the bin icon on your dashboard – as already explained.

Steps to Search and Save

On the top of the Dashboard, there is a text box for search. Enter your device search query for a particular device in this box.

faq3.6

We have entered server_ip:”10.13.1.3” . This is the syntax for server_ip equals to 10.13.1.3. Click on the rightmost search button in that textbox to search for this particular device on the dashboard. All the elements on the Dashboard shall now reflect data for the selected device.

faq3.7

Please Note : If this is just a single search event, donot follow further steps. If you want to save this search for this particular device with the Dashboard, follow steps given further to save the search. Click on Edit link above the search textbox – Save link appears. Click on Save to save this search query with the dashboard.

faq3.8

This shall stay with the Dashboard and will be seen every time we open the Dashboard. To remove the search, select the search query which you can see in that textbox, remove / delete it. Click on Edit and Save the Dashboard again. It changes back to its previous state.

faq3.9

How do I estimate my per day data?

Please refer the dedicated section to calculate your per day data size in KHIKA

SMTP settings in KHIKA

We need to make SMTP settings in KHIKA so that KHIKA alerts and reports can be sent to relevant stakeholders as emails.

Please refer the dedicated section for SMTP settings

Dealing with Syslog Device in KHIKA

Syslog service is pre-configured on your KHIKA aggregator server (on UDP port 514). Syslogs are stored in /opt/remotesylog directory with IP address of the sending device as directory name for each device sending data. This way, data of each device is stored in a distinct directory and files. For example, if you are sending syslogs from your firewall which as IP of 192.168.1.1, you will see a directory with the name /opt/remotesylog/192.168.1.1 on KHIKA Data Aggregator. The files will be created in this directory with the date and time stamp <example : 2019-08-08.log>. If you do a "tail -f" on the latest file, you will see live logs coming in.

When you want to add a new device into KHIKA

1. Note the IP address of your KHIKA Data Aggregator.
2. Please refer to OEM documentation on how to enable Syslogs. We encourage you to enable the lowest level of logging so that you capture all the details. Syslog server where logs should go is IP address of your KHIKA Data Aggregator and port should be UDP 514.

   For enable syslog of preconfigured apps in KHIKA click on the below link:
   • Symantec Antivirus
   • Cisco Switch
   • Checkpoint Firewall
   • Fortigate Firewall
   • PaloAlto Firewall
   • Sophos Firewall

3. Note the IP address of the device sending the logs (example 192.168.1.1)
4. Now go to KHIKA Data Aggregator and login as "khika" user and do "sudo su".
5. cd to /opt/remotesylog and do "ls -ltr" here. If you see the directory with the name of the ip of the device sending the data, you have started receiving the data in syslogs.

Data is not receiving on Syslog Server

please wait for some time.
Some devices such as switches, routers, etc don’t create too many syslogs.
It depends on the activity on the device. Try doing some activities such as login and issue some commands etc. The intention is to generate some syslogs.
Check if logs are generating and being received on KHIKA Data Aggregator in the directory "/opt/remotesylog/ip_of_device". Do ls -ltrh
If logs are still not being received, Please check the following points.

Check firewall settings on KHIKA Data Aggregator. Wait for some time perform some actions on the end device to generate logs and check in directory /opt/remotesylog/ip_of_device. Do "ls -ltr"

   Check firewall status
   systemctl status firewalld
   If firewall status is active, then do the following commands to inactive and disable firewalld.
   systemctl stop firewalld
   systemctl disable firewalld
   Flush iptables 
   sudo iptables –flush

Check if there is any firewall between KHIKA Data Aggregator and allow communication from device to KHIKA Data Aggregator on port 514 (UDP)
Login to KHIKA Data Aggregator and do tcpdump

   sudo tcpdump -i any src <ip_of_ device> and port 514

If you see the packets being received by tcpdump, restart syslog service using command.

   systemctl syslog-ng stop, Then wait for some time.
   systemctl syslog-ng start

Make sure you are receiving the logs in the directory /opt/remotesylog/ip_of_device Go to Started Receiving the logs only after you start receiving the logs.

Started Receiving the logs on Syslog server

Now you need to add a device from KHIKA GUI.
If the similar device of a data source has already been added to KHIKA

Add this device to the same Adapter using following steps explained here.
Else, check if App for this device is available with KHIKA. If the App is available, load the App and then Add device to the adapter using the steps explained here.
Else, develop a new Adapter (and perhaps a complete App) for this data source. Please read section on how to write your own adapter on Wiki, after writing your own adapter, testing it, you can configure the adapter and then start consuming data into KHIKA. Explore the data in KHIKA using KHIKA search interface

Dealing with Ossec Device in KHIKA

Failing to add ossec based device

1. Time out Error Check if you are getting following Error while adding the device.

This means your aggregator is not connected to KHIKA AppServer.
Check if your aggregator is connected to KHIKA server.

   1. Go to node tab in KHIKA GUI.
   2. Click on Check Aggregator Status button as shown in the screenshot below

   

   3. If it shows that the aggregator is not connected to KHIKA Server, it means that you aggregator is not connected to KHIKA AppServer.<enter link here that explains check aggregator status and solve the problem ><vrushali>

2. Device is already present
Check if you are getting the following message while adding the device
We cannot add the same device twice, Check if you already have added the device in the device list.

Data is not coming in KHIKA

Check your agent status to see if it is connected to OSSEC Server(KHIKA Aggregator).
To find the list of ossec agents along with its status click here
If it is showing the result as Active then we might first see if our search string is right. There might be some cases where we are using wrong search string or wrong index pattern to search for the data.

1. Go to the workspace in which the device is added.
2. Check in which workspace the device is added, refer the following screenshot

3. We may need to select appropriate index pattern in which data can be searched for requested server.
4. Check Data is available on Discover page

5. In the search bar we should include the server name to check if related logs are coming or not.

   Examples:
   1. If customer name is XYZ and if the server is in windows_servers workspace then we must select <XYZ>_<windows_servers>_raw_<windows> index pattern.

   2. tl_src_host : “<servername>”
   <insert screenshot where above search string is given><vrushali>

6. If you don’t find data from this device using above steps, go for further troubleshooting.

Ossec Agent And Ossec Server Connection issue

Ossec Server not running

There could be a problem where ossec server is stopped and is not running.
Go to node tab and click on Reload Configuration button to restart the ossec server.To check how to restart ossec serevr click[FAQs#How to Restart OSSEC Server|here]

There is a firewall between the agent and the server you will find following logs

If you have the following message on the Linux agent log or Windows agent log.

   Waiting for server reply (not started)

Resolution: Check with your concerned firewall team, if there is a firewall between ossec agent and the ossec server. You may need to open UDP 1514 port between ossec server and ossec agent. You can check traffic on between ossec agent and ossec server (KHIKA Aggregator) using the following command

   tcpdump  -i eth0 src xx.xx.xx.xx and port 1514

Where, eth0 is an ethernet interface this maybe with a different name on your server
xx.xx.xx.xx is an IP address in you case server IP-address if an agent, 1514 is a port address of ossec server. See the following screenshot for reference.

Wrong authentication keys configured (you imported a key from a different agent)

If that’s the case, you would be getting logs similar to Waiting for server reply (not started) on the agent side and Incorrectly formated message from 'xxx.xxx.xxx.xxx'. on the server-side.
1. Check Windows Ossec agent logs
2. Check Linux Ossec agent logs
3. Check Ossec server log

Resolution : You must add correct key for agent which is generated by ossec server.
1. Importing the ossec key to Windows ossec agent
2. Importing the ossec key to Linux ossec agent

Ossec issues in linux agent.

1. If you have logs similar to the following in /opt/ossec/logs/ossec.log.Click here to check Linux ossec agent logs:

   ERROR: Queue '/opt/ossec/queue/ossec/queue' not accessible: 'Connection refused'. Unable to access queue: '/var/ossec/queue/ossec/queue'. Giving up.

This problem occurs when there is an issue related to permissions or ownership of client.keys file.(/opt/ossec/etc/client.keys).It should be something as given below.

In the above screenshot read permission for group “ossec” is not set for file client.keys
To solve this issue please set the permission and ownership of client.keys as follow:

   1. Do ssh Login as user khika 

   2. Set root user using sudo su command.

   3. cd /opt/ossec/etc/

      

   4. chmod 440 client.keys

   5. chown root:ossec client.keys

   6. cd /opt/ossec/bin

   7. ./ossec-control restart

2. If you have logs similar to "ERROR: Authentication key file '/opt/ossec/etc/client.keys' not found." in /opt/ossec/logs/ossec.log.Click here to check Linux ossec agent logs
This means the file client.keys is not available on path "/opt/ossec/etc/" Resolution:
Please fetch the key for this agent again from KHIKA GUI.Steps to extract key from KHIKA GUI and Import unique key in agent
Restart The Ossec Agent

   1. Do ssh Login as user khika 

   2. Set root user using sudo su command
  
   3. cd /opt/ossec/bin/

      This command will take you to the directory /opt/ossec/bin/)

   4. ./ossec-control restart

3. If you have logs similar to WARN: Process locked. Waiting for permission... in /opt/ossec/logs/ossec.log. Click here to check Linux ossec agent logs
Case I: Wrong IP of Aggregator given while installing the agent.
Resolution:

   1. Go to /opt/ossec/etc directory using following command.

      cd /opt/ossec/etc/

   2. Open the ossec.conf file present in the directory.

      vi ossec.conf

   3. You must give your KHIKA Aggregtor IP in server ip field.

      <server-ip>xxx.xxx.xxx.xxx</server-ip>

   4. Close the editor after saving the changes.

      :wq

   5. Restart The Ossec Agent.

      i.  cd /opt/ossec/bin/

      ii. ./ossec-control restart

Case II: RIDS Mismatch Issue
Resolution:

   1. Go to cd /opt/ossec/etc/

   2. vi internal_options.conf

   3. Check for the following line in this file and set the value to "0"

      remoted.verify_msg_id=0

   4. Close the editor after saving the changes

      :wq

   5. Restart The Ossec Agent.

      i.  cd /opt/ossec/bin/

      ii. ./ossec-control restart

   6. Check if the problem is solved else try following steps:

      1.  Stop ossec server process

      2.  Stop Ossec agent process

         Note : know your agent id by firing command "agent_control -l" in /opt/ossec/bin directory. You will find your agents id by this command.

      3. Ossec Server Side Resolution

         i.   Login to KHIKA Aggregator and type sudo su

         ii.  Go to the directory /opt/ossec/queue/rids/ using "cd /opt/ossec/queue/rids/"

         iii. Delete the file with the name of your agents id. Using following command : rm <agent_id>

      4. Ossec Agent Side Resolution

         i.   Login to your ossec agent and type sudo su 

         ii.  Go to the directory /opt/ossec/queue/rids/ using "cd /opt/ossec/queue/rids/"   
  
         iii. type rm -rf * in this directory.

      5.  Start ossec server process

      6. Start Ossec agent process

Ossec Issue on Windows Client Side.

Note: We must install the Ossec agent on windows using Administrator(Local Admin). 1. If you have logs similar to WARN: Process locked. Waiting for permission... in ossec.log.Click here to check Windows ossec agent logs
Resolution:

   1. Login to OSSEC Agent and check the file "internal_options.conf" which is present in the directory "C:\Program Files (x86)\ossec-agent" and open it.

   2. Check for the following line in this file and set the value to "0" and save it.

      remoted.verify_msg_id=0

   3. Restart Ossec Agent

      

   4. Check if the problem is solved else try following steps

      1. Stop Ossec Server Process

      2. Stop Ossec Agent Process

         
         Note: know your agent id by firing command "agent_control -l" in /opt/ossec/bin directory. You will find your agents id by this command.

      3. Ossec Server Side Resolution

         i.   Login to KHIKA Aggregator and type sudo su.

         ii.  Go to the directory /opt/ossec/queue/rids/ using "cd /opt/ossec/queue/rids/"

         iii. Delete the file with the name of your agents id. using rm <agent_id>

      4. Ossec Agent Side Resolution

         i.  Go to the directory "C:\Program Files (x86)\ossec-agent\rids"

         ii. Delete the files present in this directory.

      5. Start Ossec Server.

         

      6. Start Ossec windows Agent.

Data Collection Issue event if the agent is successfully connected to OSSEC Server.

Centralized configuration is not pushed to ossec agent.

KHIKA Uses a centralized configuration to fetch data from all the devices(windows,linux, etc)
We may need to check if the configuration is pushed at agent side so as to ensure the data collection does not have any issues.

   1. Login to OSSEC SERVER (KHIKA data Aggregator). and become root using command “sudo su”.

   2. Check the information of your agent. using the following steps

      1. Go to directory "/opt/ossec/bin/" using cd /opt/ossec/bin/

      2. ./agent_control -i <agent_id>

         Note: know your agent id by firing command "agent_control -l" in /opt/ossec/bin directory on KHIKA Aggregator. You will find your agent's id by this command.

         

      3. Note the client version information we got using above command. This md5sum should match with md5sum of centralized configuration file present at KHIKA Aggregator.

      4. Go to directory "/opt/ossec/etc/shared/" using command "cd /opt/ossec/etc/shared/"

      5. Check the md5sum of centralized config file which is agent.conf using command :  md5sum agent.conf

         

      6. Check If this md5sum matches with the checksum of your agent we noted earlier.

      7. Restart Ossec Agent And Ossec Server Process.

Auditing is not enabled on agent.

For windows related devices, KHIKA monitors windows standard event logs related to security and other prospects. We must check if auditing is enabled at windows server so as to integrate the data with KHIKA.
For linux related devices, KHIKA ossec agent fetches data from different types of files such as "/var/log/secure" , "/var/log/messages" , "/var/log/maillog" etc. Please check if Linux server is generating logs on the server itself.

If the problem persists, Please reinstall the Ossec agent(Make sure you are root while installing on Linux and are administrator while installing on windows device.)
Note: If none of the above cases match your problem or does not solve the issue, Please try to reinstall the ossec agent.

1. Reinstall Windows OSSEC Agent
2. Reinstall Linux OSSEC Agent

Failing to Remove Ossec based device.

Time out Error

Check if you are getting following Error while adding the device.

Aggregator is not connected to KHIKA AppServer.
Check if your aggregator is connected to KHIKA server.

   1. Go to node tab in KHIKA GUI.
   2. Click on Check Aggregator Status button as shown in the screenshot below

If it shows that the aggregator is not connected to KHIKA Server, it means that you aggregator is not connected to KHIKA AppServer.<enter link here to connect aggregator for our khika appserver troubleshooting>

How to Find list of ossec agents along with it's status on command line

1. Do ssh login as user "khika” or “root" on KHIKA Aggregator
2. Use following command ( if you login as user khika)

   sudo su

3. Go to directory "/opt/ossec/bin"

   cd /opt/ossec/bin

4. Use the following command to list all agents added on ossec server (see below screenshot)

   ./agent_control -l

5. To find only connected agents list use following command

   ./agent_control -lc

6. To find disconnected agents list use following command

   ./agent_control -l | grep "Disconnected"

How to check logs in Linux Ossec Agent

1. To check the logs of your ossec agent installed on your linux server for debugging, You must need to go to the following directory:

   /opt/ossec/logs

2. Become root user using the command "sudo su"
3. Go the the above mentioned directory using "cd /opt/ossec/logs" command.
4. type " ls -ltrh " to list the files and directories present in the directory.
5. type the following command to check the log file (ossec.log ).

   tail -f ossec.log

6. Refer to the screenshot given below:

7. You can also open the file in the vi Editor the check for the issues related to the connection with Ossec Server. For this, you may need to use the following command to open the log file of ossec agent in vi editor:

   vi ossec.log

8. This is how you can check the logs of your ossec agent for troubleshooting.

How to check logs in Windows Ossec Agent

1. Open Manage Agent Application which is available in all programs or go to the following path:

   C:\Program Files (x86)\ossec-agent

2. Search for win32ui in this directory and open it using Run as Administrator.
3. Please refer to the screenshot given below.

4. This will open a window as given below:

5. Click on the view tab and then click on log to open the ossec agent's log file.
Note: This file is used for debugging the problem related to the connection with ossec server.

6. This operation will open a windows ossec agent log which is used for debugging.

How to check OSSEC Server logs

1. To check the logs of your ossec server which is installed on your KHIKA Aggregator for debugging, You must need to go to the following directory:

   /opt/ossec/logs

2. Become root user using the command "sudo su"
3. Go the the above mentioned directory using "cd /opt/ossec/logs" command.
4. Type " ls -ltrh " to list the files and directories present in the directory.
5. Type the following command to check the log file (ossec.log).

   tail -f ossec.log

6. Refer to the screenshot given below:

7. You can also open the file in the vi Editor the check for the occurred issues. For this you may need to use the following command to open the log file of ossec server in vi editor:

   vi ossec.log

8. This is how you can check the ossec server-side logs.

How to Stop OSSEC Server using command line

1. To Stop the linux OSSEC Server which is preconfigured on your KHIKA Aggregator you will have to go to the following directory:

   /opt/ossec/bin

2. Log in to KHIKA Aggregator and become root user using the command "sudo su"
3. Go the the above mentioned directory using "cd /opt/ossec/bin" command.
4. Type " ls -ltrh " to list the files and directories present in the directory.
5. Type following command to restart the ossec agent.

   ./ossec-control stop

6. Refer to the screenshot given below:

7. Your OSSEC Server is Stopped.

How to Stop OSSEC Agent using command line

1. To Stop the linux OSSEC Agent which is preconfigured on your Device which you want to monitor, you will have to go to the following directory:

   /opt/ossec/bin

2. Log in to linux device where ossec agent is installed and become root user using the command "sudo su"
3. Go the the above mentioned directory using "cd /opt/ossec/bin" command.
4. Type " ls -ltrh " to list the files and directories present in the directory.
5. Type following command to restart the ossec agent.

   ./ossec-control stop

6. Refer to the screenshot given below:

7. Your OSSEC Agent is Stopped.

How to Start OSSEC Server using command line

1. To Start the linux OSSEC Server which is preconfigured on your KHIKA Aggregator you will have to go to the following directory:
/opt/ossec/bin
2. Log in to KHIKA Aggregator and become root user using the command "sudo su"
3. Go the above mentioned directory using "cd /opt/ossec/bin" command.
4. type "ls -ltrh" to list the files and directories present in the directory.
5. type following command to restart the ossec agent.
./ossec-control start
6. Refer to the screenshot given below:

7. Your OSSEC Server is Started.

How to Start OSSEC Agent using command line

1. To Start the linux OSSEC Agent which is preconfigured on your KHIKA Aggregator you will have to go to the following directory:
/opt/ossec/bin
2. Log in to Device where ossec agent is installed and become root user using the command "sudo su"
3. Go the above mentioned directory using "cd /opt/ossec/bin" command.
4. type "ls -ltrh" to list the files and directories present in the directory.
5. type following command to restart the ossec agent.
./ossec-control start
6. Refer to the screenshot given below:

7. Your OSSEC Agent is Started.

How to Restart OSSEC Server

To restart the ossec server, You will have to peform following steps:

   1. Login to the KHIKA Appserver GUI using your credentials.
   2. Go to the node tab.
   3. Click on Reload Configuration button to restart the OSSEC Server.
   4. Refer the screenshot given below:
    

   5. When Restart is done you will see a pop-up message similar to what is shown below:

    

   6. This is how you can Restart the OSSEC Server using KHIKA GUI.
   7. If you get any error while reloading OSSEC Server, Please check if your Aggregator is connected to KHIKA AppServer.<enter link to check if the aggregator is connected to KHIKA AppServer.>

How to Restart Windows Ossec Agent

1. Open Manage Agent Application which is available in all programs or go to the following path:

   C:\Program Files (x86)\ossec-agent

2. Search for win32ui in this directory and open it using Run as Administrator.
3. Please refer to the screenshot given below.

4. This will open a window as given below:

5. Click on Manage tab and then click the restart button to restart the ossec agent.
Note : We must open the Ossec Agent Application using run as administrator.

6. This operation will restart the windows ossec agent.You can refer to the below screenshot.

7. Done

How to Restart Linux Ossec Agent

1. To restart the linux ossec agent installed on your linux you will have to go to the following directory:

   /opt/ossec/bin

2. Become root user using the command "sudo su"
3. Go the the above mentioned directory using "cd /opt/ossec/bin" command.
4. Type " ls -ltrh " to list the files and directories present in the directory.
5. Type following command to restart the ossec agent.

   ./ossec-control restart

6. Refer to the screenshot given below:

7. Your ossec agent is restarted.

KHIKA Disk Management and Issues

In KHIKA there are generally three kinds of partitions
1. root (/) partition which generally contains appserver + data.
2. Data (/data) partition contains index data which include raw data indices, reports and alerts.
3. Cold/Offline data (/offline) partition which is generally NFS mounted partition.
And this type of partition contains offline i.e. archival data which is not searchable.

To find out which partition is full use following commands

   1. df -kh
      above command will give you disk space utilization summary according to partitions.
   2. du -csh * or du -csh /data
      above command will give directory wise space usage summary.

Most probable reasons why Disk is Full :

Size of indexes, representing raw logs grows too much.
Log files of KHIKA processes does not get deleted (log files of KHIKA processes are huge)
Postgres database size get increases (when you store too many reports, alerts etc)
Report's files does not get archived(Reports are CSV and are stored as separate indexes)
Raw log files does not get archive and deleted for ossec and syslog device(ossec raw files are big, so are syslogs)
Cold/Offline storage partition gets full or get unmounted(which means, a snapshot of hot data can't happen).
Elasticsearch snapshot archival utility not working properly (which means, a snapshot of hot data can't happen).

Size of indexes representing raw logs grows too much

The goal is to find the index that eats up maximum space.

Find out from which data source you are getting more logs using a utility like dev tools (you need to be KHIKA Admin to access dev tools)

Use following commands to find out disk space usage accordingly indices

   1. GET _cat/indices

Above command will give all indices (see below screenshot). This command will give outputs as index name, size, number of shards, its current status like green, yellow, red, etc.

For example, if you want to find out indices only for FortiGate data source use command like

   2. GET _cat/indices/*fortigate*

This command will give only FortiGate data source indices along with its name, status, size, etc. See below screenshot for reference.

If you find that disk space is utilized due to raw indices

1. Make sure that the data retention period (TTL) is reasonable. You can check it by going to "Workspace" settings and modify TTL if required. Go to "Workspace" tab from "Configure" in left menu and modify it if required.

   configure -> Modify this workspace  -> Data Retention  -> Add required data retention ->save

2. Archive some data using snapshot archival utility from this current partition into cold data( kindly refer steps how to configure it). Note that Archival needs space on the cold-data destination.

3. If there is no option to free disk space then delete old large indices.Let say if you want to delete index “alpha-fortigate_firewall_3-raw-fortigate-2019.07.30” then use the following command in dev tools (You must be a KHIKA Admin )

   i.  POST alpha-fortigate_firewall_3-raw-fortigate-2019.07.17/_close
   ii. DELETE alpha-fortigate_firewall_3-raw-fortigate-2019.07.17

Log files of KHIKA processes not deleted

If you found process log files are not getting deleted :
1. Use following command to find out disk usage of log files. Log files stored as *.log extention.

   sudo find /opt/KHIKA/ -iname "*.log" -type f | grep -v kafka | xargs du -hs | sort -rh

above command will give the output of filename and it's size (see below screenshot)

2. Use command rm to remove files.
for example, to remove file “/opt/KHIKA/alertserver/log/alertserver_debug_2336.log” use below command.

   rm -rf  /opt/KHIKA/alertserver/log/alertserver_debug_2336.log

3. Make sure log file clean up cronjob is working (/opt/KHIKA/UTILS/manage_logs.sh)
To check cronjob use following command

   # crontab -l, this will give output as follow.

Here, the clean-up cron job is configured every day at 7 am.

4. If any directory entry is missing from clean-up cronjob then add it into "/opt/KHIKA/UTILS/manage_logs.sh"

Steps to add missing entry

   • vi /opt/KHIKA/UTILS/manage_logs.sh 
   • Enter in insert mode by pressing “i” on keyboard.
   • Add missing entry. Let say “/opt/KHIKA/collection/log” directory is missing then add it's entry to delete log file which is older than 7 days as follows
     find /opt/KHIKA/collection/log -mtime +7 -delete
   • Press key “Esc” to enter in command mode.
   • Press  key “:wq” to save and exit.

5. On aggregator node Make sure following properties is set to "false" in "/opt/KHIKA/collection/bin/Cogniyug.properties" file.

    remote.dontdeletefiles = false

open file opt/KHIKA/collection/bin/Cogniyug.properties using common editor like vi/vim add property and then save and exit.
If property “remote.dontdeletefiles” is not set to “false”, Aggregator will create .out and .done file in directory “/opt/KHIKA/collection/Collection” and “/opt/KHIKA/collection/MCollection” and will never delete it. This will eat up space on aggregator. Setting property to false will delete the .out and .done files

Postgres database size get increases

Using a utility like du -csh, If you found Postgres data directory(/opt/KHIKA/pgsql/data) taking more space then find out which table taking more space using following steps

1. To execute SQL command you will need access of PostgreSQL console. To get access of PostgreSQL use following command in order

   • . /opt/KHIKA/env.sh 
   • psql -d khika_db -U khika  -W
   • after enetring above command it will prompt for password .Enter the password

2. Use the following SQL command.

  SELECT relname as "Table", pg_size_pretty(pg_total_relation_size(relid)) As "Size", pg_size_pretty(pg_total_relation_size(relid) - pg_relation_size(relid)) as "External Size" FROM pg_catalog.pg_statio_user_tables ORDER BY pg_total_relation_size(relid) DESC limit 10;

Above SQL command will return top 10 table which has more size. generally, it will return the following tables.
• collection_statistics
• collection_samples
• moving_avg_sigma
• alert_details
• and report related tables

3. Let say if you found that collection_statistics table taking more space then delete data from a table from which is less than the 2018 year and Use SQL command

   delete from collection_statistics where date_hour_str <= '2018-12-31';

OR, if you want to delete from collection_samples table then use the following command

   delete from collection_samples where  date_string <='2018-12-31';

OR, if you want to delete data from table moving_avg_sigma then use the following command

   delete from moving_avg_sigma

OR, if you want to delete data from alert_details table then use the following SQL commands. (Note: it is recommended that keep alerts data at least for three years).For example, delete before the year of 2015 then use following commands

   1. delete from alert_source_device_mapping where alert_id in (select alert_id from alert_details where dtm <=( SELECT EXTRACT(epoch FROM TIMESTAMP '2015-12-31')));

   2. delete from alert_device_mapping where alert_id in (select alert_id from alert_details where dtm <=( SELECT EXTRACT(epoch FROM TIMESTAMP '2015-12-31')));

   3. delete from alert_status_audit where alert_id in (select alert_id from alert_details where dtm <=( SELECT EXTRACT(epoch FROM TIMESTAMP '2018-12-31')));

   4. delete from alert_details where dtm <=( SELECT EXTRACT(epoch FROM TIMESTAMP '2015-12-31'));

NOTE: if you found any other tables which are not in step (2) then contact an administrator.

Report's files does not get archived

Reports CSV files get stored at location "/opt/KHIKA/appserver/reports" and "/opt/KHIKA/eserver/reports" If you found that above mentioned directories taking more space.Then do following steps

1. Make sure archival cron is configured for reports (/opt/KHIKA/UTILS/manage_logs.sh)Use following command to check cron

   crontab -l

2. Make sure the following entries is present in file /opt/KHIKA/UTILS/manage_logs.sh

   • find /opt/KHIKA/appserver/reports -mtime +7 -type f | xargs gzip

   • find /opt/KHIKA/tserver/reports -mtime +7 -type f | xargs gzip

   • find /opt/KHIKA/eserver/reports -mtime +7 -type f | xargs gzip

If above entry is missing then add it using common editor like vi or vim.

3. If reports it is too old and there is no chance to free disk space then delete the reports. Use the following commands to delete report files which are older than 1 year

   • find /opt/KHIKA/appserver/reports  -type f -mtime +365 -delete

   • find /opt/KHIKA/tserver/reports  -type f -mtime +365 -delete

   • find /opt/KHIKA/eserver/reports  -type f  -mtime +365 -delete

Raw log files does not get archive and deleted for ossec and syslog device

On Aggregator node, Raw logs are stored at "/opt/ossec/logs/archives" for Ossec devices and "/opt/remotesyslog" for Syslog devices. On Aggregator by default we keep raw logs only for three days. If you find raw logs more than three days then delete it and configure cron job for the same. Add following cronjob "/opt/KHIKA/UTILS/manage_rawdata_logs.sh"

Steps to add a cronjob

   1. login as user khika on KHIKA  Aggregator server.
   2. Enter crontab -e command.
   3. Add following entry “* */2 * * * /opt/KHIKA/UTILS/manage_rawdata_logs.sh >/dev/null 2>&1” to run cronjob every 2 hour. 
   
   4. Press “ESC”  key
   5. Press key “:wq”  to save and exit.

Cold/Offline storage partition gets full or unmounted

If cold/offline storage partition gets full

Every organization keeps cold data according to their data retention policy (1 year, 2 years, 420 days, etc). If there is data which is more than organization policy data retention period then delete it.

To delete data use following command

   find location -iname “*.tar.gz”-type f -mtime +days -delete

For example, Let say offline storage location is “/opt/KHIKA/Data/offline” and the retention period is 420 days then use the following command to delete data.

   find  /opt/KHIKA/Data/offline/   -iname “*.tar.gz” -type f -mtime +420 -delete

The cold data is typically stored on cheaper storage and is mounted using NFS. Sometimes, nfs storage partition gets unmounted

1. If you know the NFS server and its shared location then refer the following command to mount it again

   mount -t nfs 192.168.0.100:/nfsshare /mnt/nfsshare

where "192.168.0.100" is nsf server and "/nfsshare" is share location and "/mnt/nfsshare" is mount point.

2. Contact server administrator to mount offline storage

Elasticsearch snapshot archival utility not working properly

Elasticseacrh Snapshot utility raises an alert when it fails to snapshot.

Alert status is "archival_process_stuck"

Alert status message "archival_process_stuck" indicates that the process is taking more than 24 hours for a single bucket. This may happen due to a script is terminated abnormally or compression operation is taking more time. Check logs and find an issue. find the current state of recent archival and change it accordingly. To change the current state of archival you will need PostgreSQL access use following command

   To get access of PostgreSQL

   1. . /opt/KHIKA/env.sh
   2. psql -d khika_db -U khika  -W
   

   3. After enetring above command it will prompt for password .Enter the password.

1. If archival bucket state is "COMPRESSING", "COMPRESSING_FAILED", then make its state as "SUCCESS" use following SQL command
NOTE: Before updating Find out required id of the record in table use following SQL command

   1. select id from application_transformerarchivalaudit where status in ('COMPRESSED' ,'COMPRESS_FILE_MOVE_FAILED')

Above command will return id, use this in next subsequent command. Let say command return id as 1.

   2. update application_transformerarchivalaudit set status='SUCCESS' where id =1

2. If archival bucket state is "COMPRESSED", "MOVING_COMPRESSED_FILE" or "COMPRESS_FILE_MOVE_FAILED" then move archival to offline storage (if available ) and update it's state to "COMPLETED"
NOTE: Before updating Find out required id of the record in table use following SQL command

   1. select id from application_transformerarchivalaudit where status in ('COMPRESSED','MOVING_COMPRESSED_FILE','COMPRESS_FILE_MOVE_FAILED')